NP203/NP205 cable shifter kit includes all the hardware, control cables (3' Standard, 4' Available), shifter boot and CNC High Def Plasma cut bracketry. This kit provides shifters to shift the NP203 range box and NP205 transfer case. This kit is designed for NP205's with modified shift rails. This kit works extremely well when you have mix matched models. i.e. Ford NP203 and GM/Dodge NP205
This kit is cut from stainless steel and comes uncoated/raw metal. This kit only works with uneven shift rails. If you have even length shift rails, you will need to swap them out.
Note: For shift cable purposes only, if you have either a Dodge np203 or np205 or both, pick GM to represent your dodge.
i.e. Dodge203/Dodge205 = GM203/GM205
Shift knob Selection: The cables run forward (to the front bumper), make a 180 deg U-turn up to the shift rails in standard builds when the shifter is place on the tunnel. Please select reverse shift pattern due the the cable change of direction.
If the cable does not change direction (has 0 deg of bend) for your custom install, select standard shift pattern.
***This will not fit divorced doubler applications***
